Category: UPS accessory / Model Name: NetProbe Lite
|
Model
Number: NET-01
Download Brochure
Check Alarm Code
|
|
Features
|
- Connects sensors devices to 10/100Base-T Ethernet network
|
- Build in a temperature and a humidity sensor
|
- Temperature detection between -40C to 100C
|
- Humidity detection between RH 0% to 100%
|
- Support 8 channels for Voltage input or 4 channels dry contact input
|
- 0V ~ 4.095V detection range in 8 bit/10 bit/12 bit resolution
|
- Voltage difference mode: Voltage difference detection of Sig-1 ~ Sig-2 and so on.
|
- Individual voltage mode, votage detection of Sig-1 ~ Sig-8
|
- Show IP address, status, Data on the LCD display
|
- PPPoE and DDNS protocol for xDSL connection to broadband network
|
- Configuration via Telnet, Web or Netility software
|
- Supports PDA, GPRS, WAP for GSM Phone
|
|
|
|
|
Product DescriptionsMany kind of equipments and devices uses
dry contact output to send alarm signal to
remote panels, and some of them could even
send DC analogy to remote monitoring and
manage systems. Communicating the status
of these dry contact systems or collecting these
DC analogy data is important in a complex
enterprise network.
NetProbe Lite is the smallest, lightest and
fastest sensor collector in the world. It is a
Web based and SNMP enabled device that
could monitor the environment conditions with
low cost. Moreover, NetProbe Lite only weights
75g, but has the heart of 32bit RISC ARM7. In
addition, it also supports varies TCP/IP protocols
such as SNMP, SNTP, PPPoE. Dynamic DNS,
SNTP, BootP, DHCP and so on and forth.NetProbe Lite is a very useful device for the user to
read data by either from the LCD display that shows
the IP address, Subnet Mask, Gateway, Status or
Voltage of individual channel sequentially or the user
could watch the data
and status on
PDA or GSM
phone via
GPRS/WAP.
Further, it is a
user-friendly Web inter-
face that allows the user to
monitor and control remotely. it
could monitors the environmental
variations and then notifies the user through Email
SMS or sent SNMP TRAPS to the Network
Management System.
|
|
